B+W

UV/ Clear Series

Active photography puts a great demand on both cameras and lenses. It makes sense therefore to use a B+W filter to protect your delicate front lens element against the elements such as blowing sand and dust, fingerprints and splashing water. B+W filters not only cost just a fraction of the price of a new lens but they are also easier to clean. 

They can remain in front of the lens permanently as they are absolutely color-neutral, highly transparent and, thanks to the B+W MRC coating or B+W MRC nano-coating, have an extremely low reflection. The optical information remains unaffected when it reaches the image sensor (or film). With these extremely clear and highly transparent B+W protection filters, no exposure compensation factor needs to be taken into account.

Protection filters play a particularly important role in digital photography. The larger depth of field resulting from smaller image sensors increases the effects on image quality from front lens soiling. Fingerprints, for instance, reduce sharpness significantly, particularly in the case of zoom lenses with a lower light intensity and frequent cleaning of the front lens can not only cause scratching, but also transport dirt particles or moisture at the edge of the mount to the inside of the lens system.

007 Clear Filter


  • Highly transparent protective glass
  • No filter effect, pure front lens protection
  • No multiplying factor
  • Made in Germany

010 UV Haze Filter


  • Color-neutral filter glass
  • Blocks annoying UV components of daylight
  • No multiplying factor
  • Made in Germany

transmission curves


Before and after shots


 



Without B+W 010 UV Haze (MRC) filter



With B+W 010 UV Haze (MRC) filter



B+W OVERVIEW FILTER TYPES

B+W Titanium Line T-Pro  |  B+W Premium Line XS-Pro Digital   |  B+W Professional Line F-Pro

Check our UV/ Clear series
T-Pro 007 Clear

The new T-Pro filter line has a very slim filter mount. The filters harmonize ideally with the increasingly compact camera systems. They prevent vignetting even with short wide-angle zooms (starting from 12 mm APS).The reflection-free titanium-colored finish gives the T-Pro filters a unique appearance. The T-Pro series is equipped with a front thread for additional accessories.

The 007 Clear filter meets the needs of many photographers for pure lens protection. Its sole purpose is to keep dirt, sand, and moisture off the front lens element

The hydrophobic coating reduces the adhesion tendency of dirt particles and water droplets. The advantages are; extremely easy cleaning and maximum reduction of reflections.

Coating: MRC nano

XS-Pro 007 Clear

Thanks to the narrow profile, the XS-Pro filter series is very well suited for short wide-angle lenses. The filters have a front thread for additional accessories. The special surface finish makes screwing in and out easier.

The 007 Clear filter meets the needs of many photographers for pure lens protection. Its sole purpose is to keep dirt, sand, and moisture off the front lens element

The hydrophobic coating reduces the adhesion tendency of dirt particles and water droplets. The advantages are; extremely easy cleaning and maximum reduction of reflections.

Coating: MRC nano

F-Pro 007 Clear

The F-Pro standard filter holder offers a large selection of diameters and filter types. The filters have a compact height and are vignetting-free with most common wide-angle lenses. Screwing in and out is easy, thanks to the matte black special varnish. All F-Pro filters are equipped with a front thread for additional accessories.

The 007 Clear filter meets the needs of many photographers for pure lens protection. Its sole purpose is to keep dirt, sand, and moisture off the front lens element

The hydrophobic coating reduces the adhesion tendency of dirt particles and water droplets. The advantages are; extremely easy cleaning and maximum reduction of reflections.

Coating: MRC

T-Pro 010 UV

The new T-Pro filter line has a very slim filter mount. The filters harmonize ideally with the increasingly compact camera systems. They prevent vignetting even with short wide-angle zooms (starting from 12 mm APS).The reflection-free titanium-colored finish gives the T-Pro filters a unique appearance. The T-Pro series is equipped with a front thread for additional accessories.

The classic amongst the B+W protection filters blocks the annoying UV component of daylight. Invisible UV light is more intense in pure sea air and in high mountain regions and can cause blurring and a blueish cast. The color-neutral B+W 010 UV Haze filter is equally suitable for both analog and digital cameras. It ensures more brilliant images and can remain on the lens permanently as front lens protection.

Coating: MRC nano

XS-Pro 010 UV

Thanks to the narrow profile, the XS-Pro filter series is very well suited for short wide-angle lenses. The filters have a front thread for additional accessories. The special surface finish makes screwing in and out easier.

The classic amongst the B+W protection filters blocks the annoying UV component of daylight. Invisible UV light is more intense in pure sea air and in high mountain regions and can cause blurring and a blueish cast. The color-neutral B+W 010 UV Haze filter is equally suitable for both analog and digital cameras. It ensures more brilliant images and can remain on the lens permanently as front lens protection.

Coating: MRC nano

F-Pro 010 UV

The F-Pro standard filter holder offers a large selection of diameters and filter types. The filters have a compact height and are vignetting-free with most common wide-angle lenses. Screwing in and out is easy, thanks to the matte black special varnish. All F-Pro filters are equipped with a front thread for additional accessories.

The classic amongst the B+W protection filters blocks the annoying UV component of daylight. Invisible UV light is more intense in pure sea air and in high mountain regions and can cause blurring and a blueish cast. The color-neutral B+W 010 UV Haze filter is equally suitable for both analog and digital cameras. It ensures more brilliant images and can remain on the lens permanently as front lens protection.

Coating: MRC

Do you have any questions or feedback? Then get in touch with us.
We will get back to you as soon as possible.

In order to answer your request as quickly as possible, please fill in all fields marked with *.

Required
Required
Required
Required
Required
Required
Required

Completely free of charge and without obligation. I am aware that my data/ usage behavior is stored electronically. You can unsubscribe this service at any time in any newsletter, or your consent to the Jos. Schneider Optische Werke GmbH.

Required

The data will not pass on to third parties. This is about our privacy.

HEADQUARTERS - Europe

Jos. Schneider Optische Werke GmbH
Ringstraße 132
55543 Bad Kreuznach
+49 (0) 671 601 205
cs@schneiderkreuznach.com

 

OFFICES WORLDWIDE

America
+1 800 645 7239 (East Coast)
+1 800 228 1254​​​​​​​ (West Coast)
info@schneideroptics.com

Asia
+86 755 8832 1170
info@schneider-asiapacific.com

Singapore
+65 9488 0062
thongv@schneiderkreuznach.com

Press Releases

Stay up-to-date on all the latest news, product releases, and more.

Exhibitions & Events

Visit us at any tradeshow or event we attend worldwide! Come with your challenge and let our experts help you find the perfect solution for your apllication.

Distribution

Get in touch with our specialist. Find a partner near to you.