The alcohol-free and biodegradable pump spray for highly sensitive optical surfaces with its strong cleaning active substances dissolves even firmly adhering dirt particles that cannot be removed by brush and microfiber cloth alone. The pump spray is easy to use and leaves no irritating residue on the lens or filter glass - for a streak-free result.

The corresponding safety data-sheet can be found in our Download Center.

The B+W Cyber Clean high-tech cleaning compound removes up to 99.999% of harmful particles from surfaces of e.g. camera housings and keyboards. Simply knead it and press it onto the surface. When the mass is pulled off, the dirt is also removed. Knead into the mass and return to the container. Can be reused several times.

The safety data-sheet can be found in the Download Center.

The B+W Cleaning Cloth (30 x 30 cm) has a high cleaning efficiency and is particularly suitable for coated optical surfaces such as photo filters and lenses. Thanks to its size and flat surface, it is easy and efficient to use. The cloth is washable up to 40 degrees and should be hand-washed with a mild detergent and rinsed well after about eight to ten uses. The cloth is supplied in a sturdy case.

The B+W Photo Clear Cleaning Cloth (20 x 18 cm) is made of a high-tech microfiber that is free of chemicals and does not lint. Environmentally friendly washable, it can be used again and again with consistent properties.

The B+W Cleaning Brush made of very fine goat hair gently and effectively remove especially loose dust and dirt particles from sensitive optical surfaces. The brush hairs are natural, undyed, and not cut. This means that there are no sharp edges. The hair tips glide gently over the surface to be cleaned. The cleaning brush is very compact at 12 cm.

Only available in a cleaning set (see below).

For cleaning lenses, objectives, and other optical or sensitive surfaces. The 15 cm cleaning brush made of natural goat hair effectively and gently removes dust and dirt particles. It has a long life because it is washable. In the black lacquered handle is a magnet for safe storage.

The bellows help to remove loose dust from sensitive optical surfaces without contact. With an overall length of 15 cm and generously dimensioned hand bellows made of easy-care, durable rubber, it fits very well in the hand. The powerful airflow can be precisely guided with the attached air nozzle. Not only lenses and filters but also inaccessible areas of sensitive device surfaces can be kept clean with the hand bellows.

You can't store your filters more stylishly. The handmade leather wallet is Made in Germany and offers space for B+W Filters up to a Ø of 77 mm in the meshes arranged one below the other. The wallet is made of the finest cow leather and closes with a hidden magnet.

The leather wallet is available in three different versions and offers space for 2 or 3 or 4 filters.

This modern felt pouch offers storage for up to 3 B+W Filters and is available in two different versions. The high-quality felt pouch is also an ideal gift for all passionate photographers.

Sizes:
- Small (Ø 37-52 mm)
- Large (Ø 55-82 mm)

For safe, dust-protected storage of filters. These flat filter cases made of robust plastic show immediately from the outside which filter is inside. A shock-absorbing foam insert prevents slipping and rattling. The stable individual cases are available in three sizes, with available inserts reducing the size for smaller filters in each case.

Sizes:
- Small (up to Ø 52 mm)
- Medium (up to Ø 77 mm)
- Large (up to Ø 105 mm)

The foldable, foam-padded pouch made of flexible plastic is equipped with a snap fastener. The transparent pockets inside provide convenient, quick access as well as a secure fit for the filters. Folded, the pouch also fits into the front pocket of a photo bag for quick access.

Made of nylon fabric that is lined, durable, and water repellent, these filter pouches have a convenient hook-and-loop closure and a window for labeling.

Sizes:
- 11.5 x 11.5 cm for filters up to Ø 52 mm
- 14,5 x 14,5 cm for filters up to Ø 105 mm
- 20 x 20 cm for filters up to Ø 127 mm

For loosening stuck filters, especially pol filters.

Sizes:
- for filters up to Ø 40.5-52 mm
- for filters up to Ø 55-72 mm
- for filters up to Ø 77-86 mm

With the B+W Filter Wrench, you can loosen stuck filters up to Ø 82 mm.

B+W adapter rings can be used to adapt filters and supplement lenses to different lens diameters. If three different diameters have to be used at once, adapter rings can be combined if necessary. An increased build-up of several mounts can lead to vignetting. B+W offers a wide range of adapter rings.

Lens hoods are essential accessories for better images and should always be used. In addition to blocking stray light, lens hoods also provide effective mechanical protection of the sensitive front lens from raindrops, accidental contact, and impacts. Our B+W lens hoods are universally designed and suitable for many lenses.

B+W Snap-Cap Pro are protective caps with two spring-loaded plastic claws that snap into the filter thread. This ensures a tight and secure fit of the cap without time-consuming screwing on and off. The claws can be operated from the side as well as from the top. Thus, this cap can also be guided through a lens hood and be put on and off, provided that it has a tube that is not too long.

Exceptionally lively color effects can be achieved with polarized light and a polarizing film on the camera. To do this, the B+W Polarizing Film is positioned in front of a light source. This works with flash units, LED photographic lamps, and flash systems. The color-neutral polarizing film can be easily cut or punched and is flexible.