The red azimuth marking helps align the lens with the sensor line. Viewed along the optical axis, the line from the lens center to the marking is positioned at 90° to the sensor line.
Why Does the Rotational Position of a Lens Matter?
Even precisely manufactured lenses have small residual centering errors. This means that their optical elements do not lie perfectly on a common axis. These manufacturing variations can cause imaging performance to vary slightly with direction across the image circle.
A line scan camera uses only a narrow, linear section of this image circle. The position of this section therefore matters. Rotating the lens around its optical axis allows a favorable optical orientation to be selected.
How Is the Azimuth Marking Determined?
During final inspection, the lens’s imaging performance is checked across the entire image circle. This identifies a line orientation that provides particularly high imaging performance. A red dot on the outside of the lens barrel indicates this individual alignment.
The marking makes the inspection result available during installation:
- Individually determined: It accounts for the optical characteristics of each lens.
- Visible from the outside: The red dot provides a reference during mounting.
- Designed for line scan alignment: It helps position the lens relative to the sensor line.
DIAMOND lens with a red dot as azimuth marking
How Should the Lens Be Aligned?
The azimuth marking is placed at 90° to the identified line orientation. During installation, the lens is rotated around its optical axis accordingly.
When viewed along the optical axis, an imaginary line from the center of the lens to the red dot must be perpendicular to the sensor line. This aligns the sensor line with the optically favorable section of the image circle identified during final inspection.
Lenses with azimuth marking