Newsroom

29.09.2020 | Industrial Optics

Discover the new bandpass filter BP 850-80 HT from Schneider-Kreuznach

Schneider-Kreuznach is pleased to present the new BP 850-80 HT infrared filter as an addition to its range of bandpass filters.

23.06.2020 | Industrial Optics

Compact TFL-Mount lenses for high-resolution cameras with 4/3” sensors from Schneider-Kreuznach | Press Release

The resolution of modern sensors is increasing with every generation. Pixels are getting smaller and while the sensor itself is getting bigger. It shows that the standard C-Mount is too small to provide a high image quality over the whole sensor size.

07.05.2020 | Industrial Optics

Discover the 1 mm optical filters from Schneider-Kreuznach

Filters play an important part in an imaging system. They block unwanted wavelengths and troublesome surrounding light, while selected wavelength ranges are transmitted at a high percentage.

14.06.2019 | Industrial Optics

Schneider-Kreuznach expands the Xenon-Topaz C-mount compact lens series

The new 6.5 mm wide-angle lens with 17.6 mm image circle, for cameras with 1.1'' sensors, completes the Xenon-Topaz series from Schneider-Kreuznach.

01.04.2019 | Industrial Optics

Schneider-Kreuznach introduces the new Xenon-Opal 2.8/12 lens

A robust C-mount lens for 1.1” sensor down to 3 μm pixel size.

02.07.2018 | Industrial Optics

Schneider-Kreuznach introduces the new SWIRON 2.8 / 50 lens

The new SWIRON 2.8 / 50 from Schneider-Kreuznach is a high-performance lens with a 50 mm focal length and fitted with a C or V mount.

29.05.2018 | Industrial Optics

Industrial lenses from Schneider-Kreuznach now with a DataMatrix code

From now on, the individual serial number of all industrial lenses from Schneider-Kreuznach will also be indicated as a DataMatrix code.

29.05.2018 | Industrial Optics

Filter holder from Schneider-Kreuznach now with Gliss-Coat

Schneider-Kreuznach converts its filter holders from black chrome to a gliss-coat finish.

New Zirconia 3.3/90 complements the series

It extends the range of Zirconia lenses with a common magnification 0.1x.
It is designed for line sensors. The main fields of application are FPD- and PCB inspection.
It has of course a very uniform imaging performance over the whole field of view and comes like all other Zirconias with V48 mount.